Response Message in “Program Name” Column

Description

1 = "Receiving"

The DNC system is ready to receive your program.  Send it now.

2 = “Received"

The DNC system received your program successfully.

3 = "Aborted"

Your command to abort the last receive request has been executed.

4 = "Recv Fail"

The file you sent was not received correctly.  Try again.

5 = "No Command"

Your command file did not contain a recognized command.

6 = "No File"

The DNC file you requested does not exist

7 = "Name Used"

Unable to create new file probably because your file name is not unique.

8 = "Bad Command"

Command not valid: missing expected argument?

9 = "Bad Version"

Your command specifies sending specific version, but that version does not exist.

*10 = "Empty File"

Your command file is empty [0 bytes])

11 = "What is *?"

Your command file contains an illegal character.

12 = "Unassigned"

The file you requested is not assigned to your machine.

13 = "Prep Fail"

Some preparation operation for the requested file failed

14 = (no text)

The CCL command file is a valid CMT file, but its format is not supported (such as T1 or M1)

*15 = (no text)

The CCL command file appears to be a Mazak CMT file but is not valid. (Points to a software problem:  CMT signature is listed as supported but the embedded CCL command cannot be located.)

16 = “Zero Length”

The specified DNC file exists but it is empty.  (It might be queued up for receiving data from a CNC.)

17 = “Checked out”

The requested file is Checked Out.

18 = “In use”

The requested file is currently being used exclusively by someone else (being uploaded or edited.)