Copyright 2017 SuiteFactory
All Rights Reserved
SuiteFactory Registered Trademark of CCI.
Click here for SuiteFactory

CAD/CAM Integration, Inc.
3 Bessom St. #212
Marblehead, MA 01945

Contact Information:
Phone: 1-781-933-9500
Fax: 1-781-494-9585
sales@suitefactory.com

none
none

Cycle Start

none

Cycle End

none

Tool Change

none

Probe Measurement

none

Maintenance Start

none

Machine Idle

Do you Have Production Events (html) Going On in Your Shop? Are Your Events Unique? Want to Create, Deploy, Capture & Report Them? SuiteFactory Does it All and Analyzes the Results!

SuiteMonitoring: A Production Event Management Solution

Operating the Manufacturing Floor Requires Managing all of your Resources

It is more than a difficult task to efficiently operate the manufacturing shop floor. You have to Manage all your Resources such as Materials, Documentation, Users, Machines, etc. Given you have all of these Resources at your fingertips you now need to have Real-Time Manufacturing Floor Status & Information in order to make decisions on how to efficiently & effectively use these Resources to Maximize Production!

What if you Don't Have the Basic Manufacturing Floor Information?

What happens when you don't even have the basic Manufacturing floor information? It doesn't matter how disciplined you are if you don't have the Manufacturing Floor's Current State and if you don't have it in Real-Time Information Updates the Best you can Hope for is Managed Chaos.

What if you Have Uncorrelated Manufacturing Floor Information?

Suppose you have access to the Manufacturing Floor Information but it is Uncorrelated & Time-Stale? In order to just use this information/data you first you have to manage, organize, correlate & massage the data. When you are viewing this data you get a Time-Stale look at how Efficiently & Effectively your Manufacturing Floor WAS Operated! You can't control your Manufacturing Floor if you don't have Real-Time Correlated Information. Not the best way to maximize your Manufacturing's use of resources!

Create Your own Correlated Real-Time Manufacturing Floor Information

What if you were able to create your own unique Production Events, Insert these in your N/C Files & Macros and whenever a Program or Macro ran the Event with its data would be sent to SuiteFactory For Storing & Displaying Real-Time Changes on the Manufacturing Floor? This Information would then allow you to make Intelligent Decisions about your Manufacturing! How can you do that? By using SuiteFactory's SuiteMonitoringTM(pdf) or (html) you can uniquely Create, Generate, Manage, Massage and Correlate these Production Events while providing two Real-Time Views of this information allowing you to make Intelligent Production Decisions Immediately!

Note: SuiteMonitoring provides all the Tools & Features you need for controlling your Shop! Have Manual Machine Tools use SuiteMDITM(pdf) or (html)!

SuiteMonitoringTM An EventAware Enterprise Class Module

DPRNT And Macro B Support

SuiteMonitoring takes advantage of the DPRNT/SPRINT feature of virtually any Controller by providing software to insert Start/End DPRNTs(Events) directly into your N/C Programs. As the N/C Programs Execute and output DPRNTs Embedded in N/C programs(start, end, tool changes, probe collection, etc.) SuiteMonitoring processes these Machine/Production/Probe Events and Displays these in real-time!

PLC Event Programming Support

SuitePLC Hardware supports capturing Electrical Signals(Events) from Machine Tools by picking up the appropriate electrical signals and based on these signals generating an equivalent SuiteMonitoring Event to SuiteFactory for processing!

Create Event Reports With Configurable Filters

After collecting the SuiteMonitoring Events you can use SuiteReportsTM(pdf) or (html) to Generate Machine Event Reports, Session Activity Reports, Data by Machine and Data Item Reports, Data Item and Machine Reports, Machine Tool Utilization Chart, Display Real-Time Utilization 7-Day History Charts(SuiteChartsTM(pdf) or (html)), etc.

Create Configurable Machine Events

SuiteMonitoring allows you to create, generate and insert Production Events into N/C Files that are output to SuiteFactory so SuiteMonitoring can processes and store these in SuiteFactory's Database. These Production Events can be: Cycle Start/End, Tool Changes, Probe Measurements, Maintenance States, etc.

Save Filtered Report Template For Single Click Reporting

SuiteMonitoring Allows you To Create Individual Event Report Templates, Save Individual Event Report Templates as Shared with Your Report Name, Save Individual Event Report Templates as Private with Your Report Name Copy, Modify and Save an Existing Template

Note: This allows you to choose a Template/Report by simply clicking your saved Template and automatically generating your reports. Configure once for Single Click Reporting!

Real-Time Machine Status Displayed At Any SuiteFactory Client

SuiteMonitoring Allows you To Display the current Event for each of the selected Machine Tools. You can select the individual Machine Tools to be Monitored at Each Client Department by Department! Machine Tool Event Activity is Obvious! You will see a Green Light Displayed if a Machine is Running and a a Red Light if a Machine is not Running

Note: This Real-Time Displayed Data can include Machine Name, Last Event Command, DNC File Name, DNC File Version, Status, Run, Idle, Elapsed Time, Cycle Count, Start Time, Last Event Time, Exceptions, Tool Number, Probe Val, Tool Number, Spindle Load, etc. You create it, you determine what to Display!

Real-Time Charting Displayed at Any SuiteFactory Client

SuiteMonitoring Allows you To Select Specific Machine Tools so that its Events are display Real-Time on SuiteChartsTM(pdf) or (html) an Interactive Intelligent Charting System. SuiteCharts Displays: Machine Name, Last Event Command, DNC File & Version, etc.

Note: You can interactively click on the SuiteChartsTM(pdf) or (html)'s Events and Retrieve the Relevant data Contained in that Event!

Real-Time Emailing Of Selected Events

SuiteEMail Allows you To Email Events from Machine Tool Macros, or from embedded Email Events in N/C Files, etc.

Note: Emailing requires support of SMTP!

Haas Software & Hardware I/O Event Monitoring Support

SuiteMonitoring Allows you To Collect Hardware I/O Events from Haas Controllers, Collect Software I/O Events from Haas Controllers

Note: CAD/CAM Integration, Inc. worked with Haas & Tobyhanna Army Depot to develop and implement these Specifications. We will be continuing to support Haas's solutions for the latest industrial standards for collecting production and manufacturing data.